1. Insert not allowed SIM card.
2. Phone will tell you to insert an allowed SIM card and that the phone will switch back to CDMA mode.
3. Click OK.
4. Click green button to get to the main screen of the phone.
5. Click on settings
6. Click on all settings
7. In the personal tab click on security
8. The phone will ask you to enter the unlock code. Enter it. Done
1 – Switch ON mobile with a non-allowed SIM Card
2 – If phone asks, enter the PIN code of your SIM Card
3 – Now phone will ask you to enter the unlocking code
How To Enter Unlock Codes on HP 8525, 3125, 2125 cellphones:
1. Power on with incorrect sim, enter unlock code when prompted
2. Enter code using onscreen keyboard when unlocking a Pocket PC Phone
How to Enter Unlock Codes For HP iPaq Series 6315, 6325, 6300, 6515 Cellphones:
1. Insert NON Cingular SIM into device
2. Power on the device
- Wait approximately 30 seconds until the SimLock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code)
3. Enter the unlock code in the blank field
4. Press Ok
- If the unlock code is incorrect, an error dialog will appear. After pressing Ok on this dialog, the user has to re-enter the unlock code after delays (see above in Device Specific Information)
- If the unlock code is correct, a success dialog will appear.
5 Press Ok
- The device is now unlocked and should continue booting
OR
1. On the Today screen, tap Start > Settings.
2. Tap the Phone Band icon.
3. Tap the Keyboard icon to open the virtual keyboard
4. Tap Shift and then Ctl key to enable the keys.
5. Tap the blank area below the band selection box to open the unlock tool.
6. Tap Shift and then Ctl to disable the keys.
7. Enter the 8-digit unlock code and tap OK when done.
8. Wait for the device to validate the unlock code (about five seconds). You will see one of the following screens:
1) Unlock successful.
2) Unlock failed due to incorrect code. The user has three attempts to unlock. After three attempts, the device will refuse any more unlocking attempts. Perform a soft reset to reset the counter to perform additional unlocking attempts.
3) Device is not ready for unlocking. This error message displays when the user tries to unlock when the phone application (not the device) is not in a steady state. It takes 30 seconds after powering on the phone for it to reach a steady state.
*If you already have an unlock code and sim card but when you input code, it always says ” unlock code not accepted, you have tried….” You must update your ROM version . About 5% hp 6315 have this problem. This problem can easy be resolved with this ROM update ( ROM v1.00.38 ). This rom update will remove all T-mobile logos and sofware and your 6315 will become OEM 6315
1. Downloa rom. Unzip/Extract it using your unzip program (i.e. WinRAR, WinZip, 7zip, etc…)
2. Place the h6315 in cradle. connect it to USB and charger
3. Double click on the hpRUU.exe to run the program
4. View the Readme and if you wish to proceed Agree to the Terms and Conditions
5. Click Next
6. Click Next again to flash the device with the new ROM
How to Enter Unlock Codes For Bosch Cellphones:
- Insert a disallowed simcard (a simcard that the phone does not usually accept)
- Enter the Unlock Code
Make sure there is a simcard in your Blackberry
1. Turn off all of the wireless connections
2. Go to Applications, then go to Options
3. Select Advanced Options
4. Select SIM Card
5. Type MEPD. You will not see any text appear on the screen while typing
6. On the next screen, type MEP then [ALT BUTTON] then the number 2 (NOTE: You will not see any text appear on the screen while typing)
7. You should be presented with a prompt “Enter Network MEP Code”. Type in the unlock code
8. You should get a code accepted message. Your phone is now unlocked
Make sure there is a simcard in your Blackberry
1. Turn off all of the wireless connections
2. Go to Applications, then go to Options
3. Select Advanced Options
4. Select SIM Card
5. Type MEPD. You will not see any text appear on the screen while typing
6. On the next screen, type MEP then [ALT BUTTON] then the number 2 (NOTE: You will not see any text appear on the screen while typing)
7. You should be presented with a prompt “Enter Network MEP Code”. Type in the unlock code
8. You should get a code accepted message. Your phone is now unlocked
Make sure there is a simcard in your Blackberry
1. Turn off all of the wireless connections
2. Go to Applications, then go to Options
3. Select Advanced Options
4. Select SIM Card
5. Type MEPD. You will not see any text appear on the screen while typing
6. On the next screen, type MEP then [ALT BUTTON] then the number 2 (NOTE: You will not see any text appear on the screen while typing)
7. You should be presented with a prompt “Enter Network MEP Code”. Type in the unlock code
8. You should get a code accepted message. Your phone is now unlocked
Make sure there is a simcard in your Blackberry
1. Turn off all of the wireless connections
2. Go to Applications, then go to Options
3. Select Advanced Options
4. Select SIM Card
5. Type MEPD. You will not see any text appear on the screen while typing
6. On the next screen, type MEP then [ALT BUTTON] then the number 2 (NOTE: You will not see any text appear on the screen while typing)
7. You should be presented with a prompt “Enter Network MEP Code”. Type in the unlock code
8. You should get a code accepted message. Your phone is now unlocked
Make sure there is a simcard in your Blackberry
1. Turn off all of the wireless connections
2. Go to Applications, then go to Options
3. Select Advanced Options
4. Select SIM Card
5. Type MEPD. You will not see any text appear on the screen while typing
6. On the next screen, type MEP then [ALT BUTTON] then the number 2 (NOTE: You will not see any text appear on the screen while typing)
7. You should be presented with a prompt “Enter Network MEP Code”. Type in the unlock code
8. You should get a code accepted message. Your phone is now unlocked
1. go to options
2 scroll to SIM CARD then press jog dial in once to select it
3. Type MEPD (not case sensitive) ( you will not see text appear on screen while typing )
4. Does it say Network active? if so your phone is locked
5. Press and hold the alt key (half moon looking key on the lower left side)
6. as you are holding the alt key type in MEPE (not case sensitive) ( you will not see text appear on screen while typing )
7. type in the unlock code when prompted
8. After entering the code press the jog dial in
9. Your phone is now unlocked
How to Enter Unlock Codes on your BlackBerry 7100 & 7130:
1. On the Home screen, click the Tools icon. The Options screen appears.
2. In the tools screen, select the Settings icon.
3. Scroll to SIM Card and select it. You should see the phone number and the SIM ID number.
4. Type ‘mepp2′ to display the dialog box asking for the unlock code (Press the Alt + 2 key to get the number 2) ( you will not see text appear on screen while typing )
5. Input the SIM Unlock code
6. Press in the jog dial once
You must have a SIM card in your phone (can be active or inactive), and turn wireless mode off.
1. Go to settings menu => and then Options
2. Select Advanced options => and then Sim card
3. Type MEPPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing)
4. On the next screen, type MEPP then [ALT BUTTON] then 2 on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing)
5. You should be presented with a prompt “Enter Network MEP Code”. Type in the unlock code
6. You should get a code accepted message. Your phone is now unlocked
Make sure there is a simcard in your Blackberry
1. Turn off all of the wireless connections
2. Go to Applications, then go to Options
3. Select Advanced Options
4. Select SIM Card
5. Type MEPD. You will not see any text appear on the screen while typing
6. On the next screen, type MEP then [ALT BUTTON] then the number 2 (NOTE: You will not see any text appear on the screen while typing)
7. You should be presented with a prompt “Enter Network MEP Code”. Type in the unlock code
8. You should get a code accepted message. Your phone is now unlocked
Make sure there is a simcard in your Blackberry
1. Turn off all of the wireless connections
2. Go to Applications, then go to Options
3. Select Advanced Options
4. Select SIM Card
5. Type MEPD. You will not see any text appear on the screen while typing
6. On the next screen, type MEP then [ALT BUTTON] then the number 2 (NOTE: You will not see any text appear on the screen while typing)
7. You should be presented with a prompt “Enter Network MEP Code”. Type in the unlock code
8. You should get a code accepted message. Your phone is now unlocked
