The Blackberry Curve 9360 was Released in August 2011. It improves on the 9300 model by providing a lighter, slimmer design, 5MP camera, and a higher resolution 480 x 360 display. It also comes with all the major features you would expect to see on a Blackberry such as 3G, GPS, NFC, Wi-Fi, Bluetooth, BBM, and a tactile physical keyboard. The phone can operate on 2G networks (GSM 850 / 900 / 1800 / 1900) and 3G networks (HSDPA 850 / 1900 / 2100).
Some key features on this phone include a 800MHz processor, 512 MB of storage (with a microSD card slot that can support up to 32 GB of additional storage), and 512 MB of RAM. It measures 109 x 60 x 11 mm, weighs 99 grams, has a 2.44 inch (~246 ppi pixel density) 480 x 360 pixels TFT display, 5 MP LED flash digital camera, Wi-Fi, Bluetooth v2.1, microUSB v2.0, GPS, and operates on the BlackBerry 7.0 OS.
Listed below are the instructions you will need to unlock your Blackberry Curve 9360:
1) Insert a non accepted simcard (a simcard that isn’t from the original carrier). Power on phone.
2) After the phone boots up, it will show the message “Your current sim card requires an unlock code. Would you like to unlock it?”. Press on “Yes”.
3) Enter the unlock code. If you don’t have an unlock code for your phone, you can get one on our unlock Blackberry webpage.
4) The phone should say “Code accepted”. Your Blackberry is now unlocked.
Here are alternate unlocking instructions if the method above gives you trouble.
1) Input a non accepted simcard in the phone (any simcard that is not from the original phone carrier). Power on phone.
2) Go to Options > Device > Advanced System Settings > Simcard
3) Type MEPD
4) A Personalization screen will show up, which will show “Sim”, “Network”, “Network Subset”, “Service Provider”, “Corporate”. On that same screen, hold the ALT button and press the buttons MEP2 (as you type, you wont see anything appear on the screen, but just go ahead and type it anyway).
5) Phone will say “Enter Network MEP Code”
6) Enter the unlock code.
7) The phone should say “Code accepted”. Your Blackberry is now unlocked.
Need more help? For support, instructions, and unlock codes, visit www.cellunlockcode.com