Unlock Blackberry Torch 9810

Blackberry Instructions,Our Blog,Unlocking Instructions Comments Off on Unlock Blackberry Torch 9810

Unlock Blackberry 9810The Blackberry Torch 9810 was released in August 2011. Its an updated version of the Torch 9800, and while it does look very similar to its predecessor, it provides a faster 1.2 GHZ processor, more memory, a beautiful 640×480 resolution display, a better camara that can shoot video in HD, and a physical slide out QWERTY keyboard. It also comes loaded with Blackberry’s latest OS 7 software, which features a much improved and much faster web browsing experience. The phone can operate on 2G networks (GSM 850 / 900 / 1800 / 1900) and 3G networks (HSDPA 850 / 1900 / 2100).

Some key features on this phone include a 1.2 GHz processor,  8 GB storage (with a microSD card slot that can support up to 32 GB of additional storage), and 768 of RAM. It measures 111 x 62 x 14.6 mm, weighs 161 grams, has a 3.2 inch (480 x 640 pixels) TFT capacitive touchscreen with 16M colors, 5 MP autofocus digital camera with LED flash, Wi-Fi, Bluetooth v2.1, microUSB v2.0, GPS, and operates on BlackBerry OS 7.0.

Listed below are the instructions you will need to unlock your Blackberry Torch 9810:

1. Insert a non accepted simcard (a simcard that isn’t from the original carrier). Power on phone.

2) After the phone boots up, it will show the message “Your current sim card requires an unlock code. Would you like to unlock it?”. Press on “Yes”.

3) Enter the unlock code. If you don’t have an unlock code for your phone, you can get one on our unlock Blackberry webpage.

4) The phone should say “Code accepted”. Your Blackberry is now unlocked.

Here are the alternate unlocking instructions if the method above gives you trouble.

1) Input a non accepted simcard in the phone (any simcard that is not from the original phone carrier). Power on phone.

2) Go to Options > Device > Advanced System Settings > Simcard

3) Type MEPD

4) A Personalization screen will show up, which will show “Sim”, “Network”, “Network Subset”, “Service Provider”, “Corporate”. On that same screen, hold the ALT button and press the buttons MEP2 (as you type, you wont see anything appear on the screen, but just go ahead and type it anyway).

5) Phone will say “Enter Network MEP Code”

6) Enter the unlock code.

7) The phone should say “Code accepted”. Your Blackberry is now unlocked.

Need more help? For support, instructions, and unlock codes, visit